Pan Phillips Screws
Pan-head machine screws with a Phillips recess. The general-purpose head for electrical, electronics and appliance assembly.
Manufactured by Uvi Tech Fit in Kundli, Sonipat, India.
Or message us on WhatsAppISO 7045, DIN 7985
Overview
The most common machine screw head: a low dome with a flat bearing face. Used in electrical parts, electronics, appliances and computer hardware, usually into a tapped hole or a nut.
Also known as: pan head machine screw, pan Phillips screw, cross recessed pan head screw.
Related parts: CSK Phillips Screws, Truss Phillips Screws, Combi Screws
Used in
- Computer hardware
- Electrical components
- Appliance assemblies
Dimensions
Pan head, cross recess (ISO 7045)
| Size | Pitch | Head dia. dk | Head height k | Recess |
|---|---|---|---|---|
| M3 | 0.5 | 5.6 | 2.4 | PH1 |
| M4 | 0.7 | 8.0 | 3.1 | PH2 |
| M5 | 0.8 | 9.5 | 3.7 | PH2 |
| M6 | 1.0 | 12.0 | 4.6 | PH3 |
| M8 | 1.25 | 16.0 | 6.0 | PH4 |
Reference values from the standard, in mm. Parts are made to your drawing or the standard you name; lengths up to 100 mm.
Parts are checked at each stage with vernier calipers, micrometers and visual inspection. Material and test reports can be arranged on request.
Request a Quote
Give size, length, material, finish and quantity. For a custom part, attach a drawing or a photo of the sample.
Questions
Does ISO 7045 or DIN 7985 matter?
Yes, slightly. The older DIN 7985 head is a little smaller and lower than ISO 7045. If your assembly has tight head clearance, name the standard you use.
Can you add a washer to these screws?
Yes. See Combi Screws with Washer: plain, spring or tooth washers can be fitted before the thread is rolled, so they cannot fall off.
Which recess size fits my screwdriver bit?
Per ISO 7045: M3 takes PH1, M4–M5 take PH2, M6 takes PH3 and M8 takes PH4.