How Parts Are Made
Heading, thread rolling, Traub turning, milling, slotting, grinding and tapping in-house at Kundli. Plating is done by finishing partners.
Two Production Routes
Parts are inspected at every stage on both routes.
Standard fasteners
Screws, bolts and standard parts
- Drawn wire
- Heading
- Thread rolling
- Plating*
- Packing
Turned components
Special parts made on Traub machines
- Bar / wire rod
- Traub turning
- Grinding
- Milling, slotting, tapping
- Plating*
- Packing
* Plating only when the order needs it, through finishing partners. See materials & finishes.
In-House Operations
Heading
Cold heading forms screw and bolt heads from drawn wire, fed from the coil.
Thread Rolling, Automatic & Manual
Threads are rolled, not cut: the dies form the thread by pressing the blank. Automatic machines for volume, operator-fed machines for short runs and special parts.
Traub Turning
Cam-driven Traub automatics turn diameters, steps, bores, chamfers and threads on bushes, pivots, studs and special parts.
Grinding
Centreless grinding brings diameters to a fine finish and close tolerance after turning.
Milling & Slotting
Secondary operations for flats, hex and square sections, and screwdriver slots.
Tapping
Internal threads in turned parts, nuts and standoffs.
From Enquiry to Dispatch
Enquiry
Drawing, sample or part number, with quantity.
Review & quote
Operations, material and finish confirmed.
Sample approval
Sample parts sent for your sign-off.
Production
Inspected at every stage.
Packing & dispatch
Packed and labelled to your quantities.